How does LPG work?
LPG – Liquefied Petroleum Gas – is stored under pressure as a liquid in a gas bottle. It turns back into a gas when you release some of the pressure in the gas bottle by turning on your appliance. A regulator ensures a consistent pressure is safely delivered from the gas bottle to your appliances.
How many LPG gas bottles do I need?
We provide most homes with two 45kg Gas Bottles. With two gas bottles, you call to order as soon as one bottle is empty, while continuing to use the other bottle. This gives you an uninterrupted supply of gas. Watch VIDEO for how to change over between bottles.
How are the gas bottles connected to my home?
The gas bottles are connected by tubing, known as “pigtails”, to a changeover valve and the changeover valve is connected to a regulator. A gas line then runs from the regulator to your appliances. The changeover valve controls which gas bottle is in use. For more info, please see the image HERE
How to order LPG & what to do if my property already has bottles?
• If your property has never had LPG you’ll have to request for a fresh installation
•If your property already has bottles you can simply reorder.
• If your property has a connection but no bottles you can either take your Elgas connection with you or order afresh.
For all options access our MOVING HOME page.
How do I make sure I don’t run out of gas?
Always order gas as soon as the first bottle runs out. Don’t wait until the gas bottles are both empty or near empty. Follow this advice and you are virtually assured to never run out of gas.
Remember to check your gas bottles more often in cold weather or when you have additional house guests.
If you only have one gas bottle attached to your home, you may wish to consider adding a second gas bottle. This is particularly wise if you use it for hot water and/or heating.
Be certain to tell us if you install additional appliances, especially if you are on automatic tanker delivery, so we can adjust your delivery schedule.
How do I know how much gas is left?
Carefully pour a cup of hot water down the side of the bottle and a line of condensation should appear at the level of the remaining gas.
If no line is apparent, you can also wait a few seconds and run your hand down the cylinder.
It will feel cool to the touch at the level of the gas. If you see no line and feel no difference in temperature, chances are the bottle is empty. Remember to always use care with the hot water.Also, please be aware that gas bottles are designed to be full at 80% or just over 3/4. The bottles are oversized so you get the full measure of gas.
The unfilled space, called “ullage”, allows for the natural expansion of the gas during warmer temperatures.
How often should I check my gas bottles?
That all depends on the type and number of appliances, your climate, the number of people in your home and how often you use the appliances.
The following maximum time intervals are based on averages and assume that you are starting with full gas bottles:
• Cooking only – Every 9 to 12 months
• Hot water only – Every 2-3 months depending on climate and the number of people in your home.
• Heater only – Every month during heating season or more often with large or multiple units and in colder climates.
• Combinations of the above – Every month or more often during heating season with large or multiple units and in colder climates.
What if the gas isn’t working?
Check to make sure the active gas bottle is turned on. The active gas bottle is the one pointed to by the changeover valve. Check to see if either gas bottle has any gas left, using the hot water test.
If so, you may need to switch to the full gas bottle with the changeover valve. If both bottles are empty, please contact us for a gas delivery and make sure you tell us you need two gas bottles.
What if there is a gas leak?
In the unlikely event that you have a gas leak, turn off the cylinder valve(s) by rotating clockwise.
You should also call the Elgas emergency response number on 0800435427.
As an added precaution, make sure the area is well ventilated to disperse any gas, and remove or turn off all flames and other sources of ignition.