Rinnai Evolve 952
Design your own with modern burn media or traditional logs and a choice of two frames. With up to 8.1 kW of heat output, the Evolve 952 gas fire can easily heat up to 125 m2. What's more, it's easy to install
- Suitable for Living rooms and open plan areas. The versatile power flue system makes for easy installation in almost any living space, including bedrooms
- Heating areas (up to): Upper North Island 125 m2. Central and lower North Island 111 m2. South Island 82 m2
- Data plate Located inside the appliance, upper right hand side.
- Convection fan 3-speed fan. Heat is distributed from the top of the appliance.
Gas connection ½ " BSP, the gas supply terminates inside the heater -- lower left hand side of the appliance.
- Ignition Continuous spark electronic ignition
- Power flue Inner 50 mm, outer 70-80 mm. Appliance must be installed with a Rinnai flue system.
- Power consumption and electrical supply High 90 W, standby < 8 W. This heater has a 1.5 m power cord with a 3-pin plug supplied. The power cord passes through a slot in the back right hand corner of the appliance
- Safety devices Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector.
Temperature control Thermostatic, temperature control range 16-26 oC.
- Ignition Continuous spark electronic ignition
- Power flue Inner 50 mm, outer 70-80 mm. Appliance must be installed with a Rinnai flue system.
- Power consumption and electrical supply High 90 W, standby < 8 W. This heater has a 1.5 m power cord with a 3-pin plug supplied. The power cord passes through a slot in the back right hand corner of the appliance
- Safety devices Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector.
- Input: 10-34 MJ/h
- Output 2.4-8.4 kW*
- Efficiency: 86%